[Size] includes hardware of headrail Custom-made: Can be customized within 275cm (W) x 275cm (H) [Material] Polyester, Aluminum [Cleaning] Non-washable on the surface, use a dry cloth, duster or a vacuum cleaner with a brush head to dust.
■ Complete installation instructions and components attached
Sizes and figures
1. Normal Headrail (Unhidden Roll)
2. Square Cassette
3. Curve Cassette
■ Brackets and hardwares are included in the blind. The total thickness after installation, depending on the system sizes and directions of installation, is about 8cm~11cm. ■ Small Cassette can be customized within 228cm (W) x 198cm (H) ; Above size is obliged to use Large Cassette. ■ If the blind is installed in the curtain box or notch, the inner depth should be at least more than 12cm for smooth installation. ■ The covering area indents due to parts from left and right sides. Ballchain control: 2.3~2.5cm/ Bottom: 1.2~1.4cm.
Systems
1. Ballchain loop(Safety guide enclosed)
2. Motorized remote control
■ Remote control ■ Remote & Simple pull control - Battery charging (work with Apple HomeKit) ■ Remote control - Quiet motor
Additional Purchase Services
■ Fancy Headrail Cover- Square / Curve style cassette ■ Motorized remote control- Also works with Apple HomeKit / Thread
Operation/Cleaning
Video:
Roller Blind
Decide which way you'd like to install your curtain, inside mount or outside mount. Measure by the following instructions:
Inside Mount
■ Install within the window frame. Often used in Bay Windows, or windows with windowsill. ■ Smooth and simple outlook. Reduce the area of covering window.
Inside Mount Measurement
STEP 1:Measure the in frame width Please measure positions of left, middle, and right. Write down the minimum figures of these three, and that is the blind width.
STEP 2:Measure the in frame height Please measure positions of top, middle, and bottom. Record the maximum figures of these three, and that is the blind height.
STEP 3:Measure the depth of window frame & the thickness of handle bar exceeds window frame. Depth of window frame — thickness of operating bar exceeds window frame≧ 7cm, the blinds can fit in the frame.
■ Minimum size unit: 0.5cm ■ The shape of window may not be vertical and level. It is suggested to measure three positions of height and width to avoid unseccessful installation. ■ Reducing 0.5~1cm is suggested for customized width. This is to leave some space for possible alteration in installation work. ■ The covering area of drape indents from left and right side. 2cm for ballchain control/ 1 cm for end control. Outside mount installation is suggested for complete coverage.
Outside Mount
■ Install on the surface, wall, or ceiling beyond the range of frame. ■ Can cover the window completely, hide window frame, increase covering area and reduce light leak in from surroundings. ■ Can hide window shape and adjust visual effect of th space.
Outside Mount Measurement
STEP 1 Decide the length of blind: Measure the in-frame width + extra width expected to cover = width needed STEP 2 Decide the width of blind: Measure the in-frame height + extra height expected to cover = height needed
■ Minimum size unit: 0.5cm ■ It is suggested to add more than 7~10cm all around the window frame. The actual extra covering area depends on the conditions of the space or visual effects requested. ■ If installed in the curtain box, reduce 0.5~1 cm on customized width is suggested to keep some space for possible alteration in installation work.
Reminders
■ The surroundings of window has to be completely flat and no obstables around when deciding window sizes. ■ Sizes shown on the products in the shipment are the sizes including systems and components.
Illustrations of sizes of window/ curtain box
Video instruction
How to get complete sizes on installation area of inside mount/ outside mount? How to know inside mount/ outside mount is best for your blinds/ curtains?